Piano Pedaling Basics: How to Use the Sustain Pedal Well

What the three pedals do, how 'legato' or syncopated pedalling works, and how to read pedal markings without blurring the music.

What the pedals do

Most pianos have three pedals. The right pedal, the sustain or damper pedal, lifts all the dampers off the strings so notes keep ringing after you release the keys. The left pedal, often called the soft pedal or una corda, makes the sound quieter and slightly veiled. The middle pedal varies: on grand pianos it is usually a sostenuto pedal that sustains only the notes held down when it is pressed; on many upright pianos it is a practice mute.

The sustain pedal is by far the most important. It joins notes that the hands cannot connect, adds resonance and warmth, and lets harmonies blend. Used carelessly, it also turns music into a blur, so learning to pedal well is as important as learning the notes.

Legato (syncopated) pedalling

The basic technique for smooth playing is called legato or syncopated pedalling. You play a note or chord, then press the pedal just after it sounds. When the harmony changes, you play the new chord and, at the same moment, lift the pedal, then press it down again immediately after. The pedal moves slightly after the hands, never at the same time.

Practise it slowly on a simple chord progression, such as C, F, G and C in the left hand. Listen carefully: there should be no gap of silence between chords and no blur of the old chord into the new one. Once it feels natural, apply it to slow pieces like Satie's Gymnopédie No. 1 or Chopin's Prelude in E minor.

Reading pedal markings

In printed music, 'Ped.' marks where to press the sustain pedal and an asterisk-like sign (✱) marks where to release it. Modern editions often use a bracket line under the staff instead, with notches showing a quick release and re-press. Many scores have no pedal markings at all, especially Baroque and Classical music, and the player is expected to decide.

A good rule is to change the pedal whenever the harmony changes and to listen rather than follow a fixed pattern. In Bach and Scarlatti, use little or no pedal so the lines stay clear. In Chopin, Liszt and Debussy, the pedal is part of the sound, but it must still be changed often enough to keep the melody clean.

Common mistakes

The most common mistakes are pressing the pedal at the same time as the keys (which creates gaps), holding it through changes of harmony (which creates blur), and 'stamping' so the pedal makes a thump. Keep your heel on the floor and move only the front of the foot, pressing the pedal smoothly.

Partial pedalling — pressing the pedal only halfway down or lifting it only partly — is an advanced skill that gives more colours. Try it once basic pedalling is secure, and always let your ears decide.

Related

More guides